CaptionCall 57T - Page 110

110 CaptionCall
Table of ContentsAmplification Settings
Using the Audiogram Settings
How to select an Audiogram setting option:
1. Touch the drop-down list on the Audiogram Settings screen to display the list
of audiogram setting options.
2. Select the desired option from the list. A graph of the selected option will
then appear, which shows the volume settings for each frequency.
3. Touch the Save button to save the selected audiogram setting option.
How to congure the volume levels in the Custom setting option:
1. Touch the drop-down list on the Audiogram Settings screen to display the list
of audiogram setting options.
2. Select the Custom option from the list. A graph of the Custom option will
then appear, which shows the volume level for each frequency.
3. Place your nger on the green dot for the frequency you want to adjust.
4. Drag the dot to the volume level that you want for that frequency. (e
volume range for each frequency can be set from -10dB to +25dB.)
5. Remove your nger from the dot.
6. Repeat Steps 3 through 5 as needed for other frequencies until you have set
the volume for each frequency to the desired levels.
7. Touch the Save button to save the changes.