user guide 139
FCC Notices
FCC Notices
is equipment complies with Part 68 of the FCC rules and the requirements adopted
by the ACTA. On the base of this equipment is a label that contains, among other
information, a product identier in the format US:AAAEQ##TXXXX. If requested,
this number must be provided to the telephone company.
is telephone connects to the telephone network using an RJ11 connector.
A plug and jack used to connect this equipment to the premises wiring and telephone
network must comply with the applicable FCC Part 68 rules and requirements adopted
by the ACTA. A compliant telephone cord and modular plug are provided with this
product. It is designed to be connected to a compatible modular jack that is also
compliant. See installation instructions for details.
e REN is used to determine the number of devices that may be connected to a
telephone line. Excessive RENs on a telephone line may result in the devices not
ringing in response to an incoming call. In most but not all areas, the sum of RENs
should not exceed ve (5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total RENs, contact the local telephone
company. e REN for this product is part of the product identier that has the format
US:AAAEQ##TXXXX. e digits represented by ## are the REN without a decimal
point (e.g., 03 is a REN of 0.3).
If this CaptionCall phone causes harm to the telephone network, the telephone
company will notify you in advance that temporary discontinuance of service may be
required. But if advance notice isn’t practical, the telephone company will notify the
customer as soon as possible. Also, you will be advised of your right to le a complaint
with the FCC if you believe it is necessary.
To Next Page
Loading...
