user guide 119
Wireless Network Settings
3. After you select an SSID, the phone will automatically detect and set the
correct options in the Network Type and Encryption drop-down lists. Here
are details on the selections that will be automatically made by the phone
based on the type of network detected:
• For an Open network (i.e., no security protocol is in use), the Network
Type drop-down list will be set to Open. e Encryption drop-down list
will be set to None.
• If the Open network uses WEP encryption, the Encryption drop-down
list will be set to WEP.
• If either the WPA or WPA2 security protocols is being used, the phone
will automatically select the correct Network Type. e phone will also
select the proper setting in the Encryption drop-down list (i.e., TKIP or
AES encryption).
4. If your wireless router is using encryption, touch the Network Key eld to
display a keyboard in which you can enter the key. Be very careful to enter
the network key correctly because if you make even one mistake, the phone
will not be able to connect to your router. After you enter the correct key, the
phone will obtain its IP address from the router using DHCP.
5. Touch the Save button to save the wireless settings. You will then be back at
the Wireless Network Settings screen. e router’s name (SSID) will be shown
in green type to indicate that the phone is connected to that router.
To Next Page
Loading...
