ECG100+ - ECG200+ - ECG100S - ECG200S
7. EXECUTION OF AN EXAM
The examination can be transmitted automatically or manually (using the LINK key) at the end of the
acquisition, as described in par. 7.5.1, depending on whether the “Autosave” function is active in the Settings
(par. 8.6.7).
If the “Autosave” setting is enabled and transmission fails, the device will try again until it succeeds.
You can always send or re-send an examination from the ECG Archive by selecting the exam in question,
open it clicking Select and then clicking on LINK. From the ECG Archive you can also transmit all
untransmitted exams together clicking on LINK.
See par. 8.3 for further details about the ECG Archive.
NOTE: if you are trying to send a test that has already been sent previously, you will be asked to confirm the
operation.
To Next Page