Cardo Systems Q1 - Page 2

TopairascalariderQ1headsetwithyourGPS:
1.TurnthescalariderQ1moduleonbypressingandholdingtheControlbuttonuntilthree(3)blueflashesappear.
2.WiththeQ1flashingslowlyinblue,pressandholdtheVolumeDownbuttonuntilyoureceivearedandblue
alternatingflash.
3.OncetheQ1moduleisflashingredandbluealternating,searchfor/AddaBluetooth‘audio’device/headsetfrom
yourGPS.
4.TheGPSshouldmomentarilydiscoverthe‘scalariderQ1’.Ifpromptforapas s key,thiswillbefourzeros(0000).
5.TheGPSshouldmomentarilyconfirmthatthepairinghasbeencompleted,andtheheadsetshouldreturnto
stand‐bymode.
Pleasefeelfreetocontactusifwecanassistyouwithanyotherquestions.
Bestregards,
TechnicalSupport
CardoSystems,Inc.
Phone:+1412.788.4533
Fax:+1412.788.0270
TollFree:+1800.488.0363
International:+49.894.503.6819
support@cardosystems.com

www.cardosystems.com