How to reset Cardo Systems Headsets to factory settings?
To reset your Cardo Systems Headsets to factory settings, press the Intercom, Volume Up, and Phone buttons simultaneously for 5 seconds while in Standby mode. This action deletes all paired devices. Alternatively, you can use the Cardo Connect App or select 'Reset to Factory Settings' in the Advanced Features menu.
What to do if Cardo Systems PACKTALK unit stops responding?
If your Cardo Systems Headsets unit stops responding, tap the Intercom and Volume Up buttons. Then press the Intercom button for 2 seconds.
General| Brand | Cardo Systems |
|---|---|
| Model | PACKTALK |
| Category | Headsets |
| Language | English |
Details basic operations like powering on/off, volume control, and mute functions.
Explains the meaning of different LED light patterns for device status.
Describes how to stream audio from two sources simultaneously and their priority.
Guides on using voice commands for hands-free operation of the device.
Explains VOX technology for hands-free operation and its settings.
Details the Dynamic Meshwork Communication mode for group intercom.
Explains Bluetooth intercom communication methods like '1+8' and conferencing.
Describes the 'busy' signal indication when attempting to connect to an occupied device.
Information on how intercom calls are received and initiated.
Instructions for pairing Bluetooth devices like phones, GPS, and MP3 players.
Details on answering, rejecting, ending, and initiating phone calls.
Guides on playing music via Bluetooth using A2DP/AVRCP profiles.
Explains how to share music with a passenger via Bluetooth intercom.
Instructions on how to tune and save FM radio stations and presets.
Details on finding and storing temporary FM radio stations automatically.
Procedure to restart the unit if it stops responding.
Instructions for resetting the device to factory default settings.
To Next Page