Why won't my CareCo Scooter switch on?
Your CareCo Scooter might not switch on due to several reasons: the batteries may not be connected (check that the batteries are connected properly), the rear and front sections might not be connected (check the connection on the front to rear loom), or the circuit breaker may have tripped (push the circuit breaker button to reset it).
What to do if my CareCo Scooter switches on but won't run?
If your CareCo Scooter switches on but doesn't run, the possible causes are: flat batteries (check battery power), the charger is plugged in (unplug the charger), or the motor is in freewheel mode (re-engage the freewheel lever).
Why is my CareCo Scooter so slow?
If your CareCo Scooter appears slow, it could be due to flat batteries (check battery power and/or recharge them) or the speed setting is set to slow (check the speed dial is not set at low).
What does it mean when LED lights 4 & 5 are on on my CareCo Scooter?
If LED lights 4 & 5 are lit on your CareCo Scooter, it indicates that the battery is not connected, or there is a poor connection to the battery terminals. Ensure the battery box is placed securely in the scooter and that all packaging has been removed.
What do LED lights 3 & 5 mean on a CareCo Scooter?
If LED lights 3 & 5 are illuminated on your CareCo Scooter, it could be due to an improper sequence of throttle and KSI, push, or inhibit inputs, or a misadjusted throttle pot. Check the condition of the throttle lever and ensure that it is in the centre before turning on.
What does it mean when LED lights 3 & 1 are on on my CareCo Scooter?
If LED lights 3 & 1 are lit on your CareCo Scooter, it could be due to a misadjusted throttle or a broken throttle pot or throttle mechanism. Check the condition of the throttle lever and ensure that it is in the centre before turning on.
What do LED lights 3 & 2 mean on my CareCo Scooter?
If LED lights 3 & 2 are illuminated on your CareCo Scooter, it could indicate an electromagnetic brake driver shorted or an electromagnetic brake coil open. Check the brake / freewheel lever is in the 'Drive' position before turning on.
What does it mean when LED lights 3 & 4 are on on my CareCo Scooter?
If LED lights 3 & 4 are lit on your CareCo Scooter, it could indicate an electromagnetic brake driver open or an electromagnetic brake coil shorted. Check the brake / freewheel lever is in the 'Drive' position before turning on.
What does it mean when LED lights 1 & 4 are on on my CareCo Scooter?
If LED lights 1 & 4 are illuminated on your CareCo Scooter, RE-CHARGE the scooter.
What does it mean when LED lights 1 & 2 are on on my CareCo Scooter?
If LED lights 1 & 2 are illuminated on your CareCo Scooter, ensure the throttle lever is in the centre position before turning the scooter on.
Details crucial safety rules and restrictions during scooter operation.
Explains the procedures for powering on/off, moving, and braking the scooter.
Guides users on switching the scooter between drive mode and manual freewheel mode.
Details how to adjust the tiller to a comfortable position for the user.
Lists essential checks and procedures for safely starting and driving the scooter.
Explains the correct procedure for stopping the scooter and powering it off.
Provides instructions for charging the scooter's battery pack, including connection and duration.
Details the step-by-step process for safely replacing the scooter's batteries.
General| Range | Up to 20 miles |
|---|---|
| Battery | 2 x 12v 36ah |
| Foldable | No |
| Maximum Speed | 4 mph |
| Turning Radius | 147 cm |
| Overall Width | 0.61 m (24 inches) |
| Weight | 68 kg (150 lbs) |
| User Weight Capacity | 21 Stone (133 kg) |
To Next Page