80 Infant Flow
®
SiPAP
675-120 Revision C November 2004
6. Set the pressure High Flow Meter to about 2 LPM then push its softkey button under the
right flowmeter icon.
7. The Respiratory Sensor option is not required, but to finish, select this soft key button.
8. Accept the NCPAP settings by selecting the NCPAP soft key. (%O2 should display 100)
(Figure 2).
Figure 2
9. The next screen varies but select BiPhasic soft key (Figure 3).
Figure 3
To Next Page