Need help?Do you have a question about the Carel µAD and is the answer not in the manual?
General| Series | µAD |
|---|---|
| Digital inputs | 4 |
| Relay outputs | 2 (SPDT 5 A) |
| Serial ports | 1 (RS-485) |
| Communication | Modbus RTU |
Provides a general introduction to the µAD device and its capabilities.
Details about different µAD models and their respective functionalities.
Lists compatible controls and defines key terms and abbreviations.
Guides on physically installing the µAD unit and its placement.
Instructions for connecting the RS485 serial network interface.
Detailed steps for connecting the power supply to the µAD.
Explains the function of each key on the µAD interface.
Describes the symbols and information shown on the µAD display.
Explains how µAD communicates via the RS485 network.
Illustrates different plant configurations with µAD and µChiller/µC2SE.
Pre-operational checks and warnings for system configuration.
Steps for putting the system into operation after configuration.
Explains functioning modes, ON/STAND BY, and temperature settings.
Details on setting cooling, heating, auto modes, and de-humidification.
Covers humidification, humidity set points, and the energy-saving sleep mode.
How to set timed operations, adjust the clock, and manage fan functionality.
Details on the compensation function for improved system efficiency.
How to restore defaults and edit various system parameters.
Lists and describes various parameters available for configuration.
How the µAD displays and manages chiller alarms.
Detailed technical specifications including power, dimensions, and environmental data.
To Next Page
