Carel pCO compact PCOX000AA0 - Technical Specifications

6
“pCO compact” +050003343 - 1.3 - 12.09.2016
ENG
2. TECHNICAL SPECIFICATIONS
2.1 Mechanical specications
dimensions
available in 6 DIN module format 105x115x60 mm
assembly
DIN rail
2.2 Plastic case
•
Fitted on DIN rail as per DIN 43880 and IEC EN 50022
• Material: technopolymer
• Flame retardance: V2 (UL94) and 960 °C (IEC 695)
• Ball pressure test 125 °C
• Resistance to creeping current ≥ 250 V
• Colour grey RAL7035
2.3 Electrical specications
Isolated power supply DC power supply: 48 Vdc (36 V min to 72 V max)
AC power supply: 24 Vac +10% to -15 %, 50/60 Hz
Maximum power input:
MEDIUM ver. P=6W, P=8VA, Imax=400mA
LARGE ver. P=11W, P=14VA, Imax=700mA
CPU H8SX/1651 32-bit, 50 MHz
FLASH program memory 2+2 Mbytes
SRAM data memory 512 Kbytes, 16-bit
EEPROM parameter data
memory
13 Kbytes + 32 kB
NAND FLASH memory 32 MByte
Duration of working cycle 0.2 s typical (applications of average complexity)
Clock Available as standard and integrated on main board
Tab. 2.a
Battery specications
The battery used inside the pCO compact is a “button” sized lithium battery, code CR2430, 3 Vdc, dimensions 24 mm x 3 mm.