11
“pCO compact” +050003343 - 1.3 - 12.09.2016
ENG
Hardware congurations available
Models PWM
output
0...10 V
output
Analogue
inputs
Digital
inputs
Group 1
output
Group 2
output
Group 3
output
Group 4
output
TYPE A Y1 Y2 B1, B2
B3, B4 NO1: NO2: NO3, -
B5, B6 - relay (1) - relay (1) NO4,
B7, B8 - SSR (3) - SSR (3) NO5,
ID1 (veloce) NO6,
ID2 NO7:
Max 8 Max 6 - Relay (2)
TYPE B Y1 Y2, Y3, Y4 B1, B2
B3, B4 NO1: NO2: NO3, NO5,
B5, B6 - relè (1) - relè (1) NO4: NO6:
ID1 (veloce) - SSR (3) - SSR (3) - Relay (2) - Relay (2)
ID2
Max 6 Max 4
Tab. 2.k
(1) Note: the relay is present instead of the SSR in the models not designed for having SSR.
Relay specifications:
UL873: 2,5 A res., 2 A FLA, 12 A LRA, 250 Vac, C300 pilot duty (30.000 cycles)
EN60730-1: 2 A res., 2 A inductives, cos(phi)=0,6, 2 (2) A (100.000 cycles)
(2) Note: the relay is present instead of the SSR in the models not designed for having SSR.
Relay specifications:
UL873: 1 A res., 1 A FLA, 6 A LRA, 250 Vac, D300 pilot duty (30.000 cycles)
EN60730-1: 1 A res., 1 A inductives, cos(phi)=0,6, 1 (1) A (100.000 cycles)
(3) Note: the SSR is present instead of the relay in the models designed for having 2 SSR.
SSR specification:
Relay Power MOSFET Photovoltaic, Operation voltage: 24 Vac/Vdc, Maximum power: 10 W
SSR specification:
Relay Power MOSFET Photovoltaic, Operation voltage: 24 Vac/Vdc, Maximum power: 10 W
Types of analogue/digital inputs
All the analogue inputs are can be configured via software, according to the following table, in the models TYPE A and TYPE B.
Symbol NTC ID PT1000 4 to 20 mA 0 to 5 V 0 to 1 V 0 to 10 V
B1, B2
• • • • •
B3, B4
• • •
B5, B6
• • • • •
B7, B8
• •
Tab. 2.o
To Next Page
Loading...
