13
“pCO compact” +050003343 - 1.3 - 12.09.2016
ENG
4. DESCRIPTION OF THE TERMINALS
1 32
4
5
6
7 8 9 10
11
12
13
J7
J10J9J8J5
J1
G
G0
+5Vref
+VDC
ID1
GND
J3
C1
NC1
NO1
J2
SYNC
B1
B2
B3
B4
B5
B6
GND
serial card 1
J4
J6
TLAN
GND
C2
NO2
GND
Y2
Y1
GNX
ISOLATE D
Tx/Rx
PWM 0/10V
GNDTx/Rx
J12
GND
ID2
B7
B8
J11
NO4
NO5
NO6
NO7
C3
NO3
C3
24 V (+10/-15%); 50/60 Hz
48 V (36Vmin…72 Vmax)
input voltage: max. power:
14 VA /11 W
14
GND
ID2
Y3
Y4
0/10V 0/10V
J13
NO3
C3
NO4
J11
NO6
C5
NO5
J12
15
16
Legenda:
1 power supply connector
(G, G0) 24 Vac or 48 vdc (36 Vdc min...72 Vdc max)
2 “SYNC“ synchronicity inputs for phase control and NTC, 0...1 V, 0 to 5 V, 0 to 20 mA, 4 to 20 mA +5 Vref for probe power supply,
5 V ratiometric and + VDC (+21 Vdc) for active probes
3 digital output
4 connector for all pCO series standard terminals and downloading the application program
5
pLAN connector
6
pLD terminal connector
7
tLAN connector
8 opto-isolated “Field-Bus“ serial connector
9 0 to 10 V and PWM (phase control) analogue outputs
10 digital output
11 digital outputs (Type A)
12 NTC analogue inputs and digital inputs (Type A)
13 removable door to access the USB ports
14 digital outputs (Type B)
15 digital outputs (Type B)
16 digital input and analogue outputs 0 to 10 V (Type B)
TYPE A Version
TYPE B Version
To Next Page
Loading...
