Carinci evolution - PROCEDURAL GUIDE ON IGNITING THE MACHINERY FOR THE FIRST TIME

To cut out and post
STAGE 1: Regulating the combustion
30 minutes after ignition, regulate the combustion using the designated regulators on the extractor speed (combustion air input)
and auger speed (fuel input).
Note the settings of:
Fan parameter Auger parameter
Upon ignition
30 minutes after switching on
60 minutes after switching on
STAGE 2: Filling out the "Warranty Certicate"
Fill out the "Warranty Certicate" and validate a copy for the Client.
PROCEDURAL GUIDE ON IGNITING THE MACHINERY FOR THE FIRST TIME
The T.A.C., only when authorised in advance by CARINCI GROUP S.p.A., can perform the "Set Up" procedure:
Name................................................................................. Surname.............................................................................
Address................................................................................................................................... .................... Post code................ .........................................
City............................................................................................................. (Province ......) Tel. ........................................................ ....
CARINCI MACHINERY Mod. ...................................................................... Matriculation No. .....................................................
Date of purchase ..................................... Seller
..............................................................................................................................................................
City........................................................................................................................................................ (Province ......) Tel. ........................................................ ....
Installation Company T.A.C. (insert the date of the "Set Up Protocol" where requested (Art. 8 Par. a) - date / /
)
I agree to the treatment of my personal data in accordance with Legislative Decree 196/2003. I declare to fully accepting the "General Terms and Conditions of Warranty", to having received all the
information required to use the machinery correctly and to possessing all the introduction Manuals and having read them in their entirety.
Signature ............................................................................................................................