EN
www.carlisleft.com 77-3345 R1.1 (06/2022)
29 / 62
5. Disassembly instructions:
Pull out the plastic distances (1) then the three distances (2) from the central body axis, tool 6004 0154 11
can be used (see page 16). Remove the seals (3) and O-rings (4) from the distances. The central body
parts have all been disassembled and can be cleaned appropriately.
The bracket for the swivel lock can be removed by unscrewing the four screws (5) holding the bracket (6)
to the air housing. Then remove the bracket (6), the two pins (7) can also be removed.
Be sure to store all removed parts in a safe place.
1
2
4 3
5
6
6
7
To Next Page
