CARLO GAVAZZI VariFlex3 RVLF Series - Page 26

24 Specications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. 18/11/2014
Motor Controllers AC Variable Frequency Drives Type Variex
3
RVLF
Group 06 Auto run (Auto sequencer) function
No. Description Range
Factory
setting
Unit Note
06-00
Auto Run (sequencer) mode
selection
0: Disabled.
1: Single cycle. (Continues to
run from the unnished step if
restarted).
2: Periodic cycle. (Continues to
run from the unnished step if
restarted).
3: Single cycle, then holds the
speed of nal step to run. (Con-
tinues to run from the unnished
step if restarted).
4: Single cycle. (Starts a new
cycle if restarted).
5: Periodic cycle.
(Starts a new cycle if restarted).
6: Single cycle, then hold the
speed of nal step to run
(Starts a new cycle if restarted).
0 -
06-01
Auto Run mode frequency
command 1
0.00~650.00
0.00 Hz *1
06-02
Auto Run mode frequency
command 2
0.00 Hz *1
06-03
Auto Run mode frequency
command 3
0.00 Hz *1
06-04
Auto Run mode frequency
command 4
0.00 Hz *1
06-05
Auto Run mode frequency
command 5
0.00 Hz *1
06-06
Auto Run mode frequency
command 6
0.00 Hz *1
06-07
Auto Run mode frequency
command 7
0.00 Hz *1
06-08
~
06-15
Reserved
06-16
Auto Run mode running time setting 0
0.0~3600.0
0.0 sec
06-17
Auto Run mode running time setting 1 0.0 sec
06-18
Auto Run mode running time setting 2 0.0 sec
06-19
Auto Run mode running time setting 3 0.0 sec
06-20
Auto Run mode running time setting 4 0.0 sec
06-21
Auto Run Mode running time setting 5 0.0 sec
06-22
Auto Run mode running time setting 6 0.0 sec
06-23
Auto Run mode running time setting 7 0.0 sec
06-24
~
06-31
Reserved
06-32 Auto_ Run
mode running direction 0
0: Stop
1: Forward
2: Reverse
0 -
06-33 Auto_ Run
mode running direction 1 0 -