18” CHIPPER DAILY CHECKLIST
14
• Inspect radiator screen. This screen along
with the radiator fins must be kept clean.
Dust and debris can easily clog the screen
and or radiator and cause overheating
along with major engine damage. Inspect
fan blades for wear or damage.
• Check and maintain proper engine oil, fuel,
radiator coolant, and hydraulic oil levels.
Make sure engine is cool before checking.
Replenish engine oil, fuel, radiator coolant,
and hydraulic oil every morning before
starting the machine so there is no danger
of fire from hot machine parts or sparks.
See engine manual for special instructions.
NEVER REFUEL OR ADD OIL: WHILE
ENGINE IS RUNNING, WHILE IN AN
ENCLOSED AREA, OR WHILE
ENGINE IS HOT.
• Inspect air filters for dirt and damage,
clean or replace as necessary.
REPLACE WITH MANUFACTURER
RECOMMENDED AIR FILTERS ONLY.
The proper repair or replacement procedures, if required, are further illustrated in the
Maintenance or Service Sections of this manual. Other periodic inspections and maintenance are
covered in other sections of this manual.
RADIATOR CAP ON
TOP OF ENGINE
OIL DIPSTICK
REMOVE ENGINE
COVER AND CHECK
OIL LEVEL
JOHN DEERE ENGINES
REQUIRE A SPECIAL
COOLANT ADDITIVE.
SAFETY FILTER MAIN FILTER
HYDRAULIC OIL SHOULD BE VISIBLE IN THE
LEVEL/TEMP GAUGE, MAKE SURE THE OIL IS BETWEEN
THE TOP BLACK LINE AND THE BOTTOM RED LINE (SEE
SERVICING HYDRAULICS SECTION).
To Next Page
Loading...
