Access Panel Variations
Remote Mounting Box Installation
1a 2 3
1 2 3
1b
Slide the Top Panel back and off the lid.
(This panel will no longer be required).
There are clips at each end so the Top
Panel Should be carefully levered or
exed to clear both clips.
Slide the Access Box up and off the lid.
There are clips at each end so the Top
Panel Should be carefully levered or
exed to clear both clips.
Find the Front Panel supplied loose in the
pack (This panel is slightly larger than the
Top Panel removed). Slide the Front Panel
onto the lid ensuring it locks into position.
Slide the Access Box onto the lid ensuring
the overhang tab is to the rear of the cistern
and it locks into position.
The Panel and Access Box should lock
together neatly as shown.
Access Box with
Dust Cover
“click”
“click”
Front Cover
(supplied loose)
Top Cover
The Cistern is supplied standard with Front Access.
For conversion from Front to Top Access follow this procedure.
clips
Clips
14
1a. The Remote Mounting Box can be xed
to timber studs using suitable xings....
1b. ....or mortared into brickwork.
2. Make sure the Pneumatic Hose is
accessible through the Remote Mounting
Box and ensure the hose has no kinks or
is not pinched in any way prior to the nal
cladding being added.
Once the nal cladding has been added the
box must be trimmed ush with the wall.
3. The Remote Mounting Box is now ready
for the Button Assembly installation.
To Next Page
Loading...
