10
Model: CPU-3QD
This model is equipped with on-board
cleaning tools including a metal telescopic
wand, stretch hose, dusting brush and
crevice tool.
1. To use the cleaning tools, lift the hose
handle straight up from the vacuum
(Fig. 1).
2. Extend the wand by pulling the button
back and pushing the end of the wand
forward (Fig. 2).
3. Attach any of the on-board tools
to the end of the wand or directly onto
the hose handle (Fig. 4) and (Fig. 5).
Model: CPU-4T
This model is equipped with on-board
cleaning tools including a metal wand,
stretch hose, dusting brush and crevice tool.
1. Remove the stretch hose from the
nozzle of the vacuum (Fig. 3).
2. Attach any of the on-board tools
to the end of the wand or directly
onto the house cuff (Fig. 4) and (Fig. 5).
ON-BOARD TOOL CLEANING
Fig. 4 Fig. 5
Fig. 1 Fig. 2
Fig. 3
To Next Page
Loading...
Need help?
General
