14
PROBLEM CHECK POINT POSSIBLE SOLUTION
Vacuum won’t
turn on
Power Cord Plug unit in firmly.
House Fuse or Breaker Replace fuse/reset breaker.
Vacuum won’t
pick up or low
suction
Vacuum Bag Install new bag.
Filter Install new filter.
Hose Remove obstacle.
Dust escaping
from vacuum
Bag Compartment Cover Reinsert the cover and secure latch.
Filter Review filter installation (page 8).
Vacuum Bag Review bag installation (page 8).
Troubleshooting
WARNING! To reduce the risk of electrical shock or injury from moving parts, unplug
vacuum before servicing or cleaning.
CAUTION! To reduce the risk of electric shock, do not handle plug or appliance with
wet hands.
Any other service should be performed by an AuthorizedService Representative.
To locate your nearest Authorized Retailer, visit our website at
CarpetProVacuums.com or call 866-539-2099.
For Best Performance
• Keep machine and all accessories clean and in good operating condition.
• Change vacuum bags when they are 2/3 full to maintain optimum
cleaning efficiency.
• Change filters when dirt is visible on them or every six months if someone in your
home suffers from allergies. Otherwise, once a year should do for replacing the filters.
• Replace filters frequently if vacuuming fine powders such as flour or drywall dust.
• Always use genuine filters and parts, as use of other products may result in poor
cleaning or filtration performance. Genuine filtration products are designed
for maximum performance.
• Store machine carefully in a dry area.
• For optimum cleaning performance and safety, follow your owner’s manual instructions.
PROBLEM SOLVING GUIDE
To Next Page
Loading...
Need help?
General
