To Next PageTo Next PageWhy Carpet Pro SCBP-1 Vacuum Cleaner won't pick up?
If your Carpet Pro Vacuum Cleaner isn't picking up dirt or has low suction, the issue might be due to a full vacuum bag, a broken belt, or a worn brushroll. Try installing a new bag, replacing the belt, or replacing the brushroll to resolve the problem.
What to do if my Carpet Pro Vacuum Cleaner won't turn on?
If your Carpet Pro Vacuum Cleaner isn't turning on, it could be due to a few reasons. First, ensure the power cord is firmly plugged into the outlet. Also, check your house fuse or breaker; replace the fuse or reset the breaker if needed. If these steps don't work, visit a Carpet Pro service center.
How to stop dust escaping from Carpet Pro SCBP-1 Vacuum Cleaner?
If dust is escaping from your Carpet Pro Vacuum Cleaner, it's likely that the vacuum bag isn't installed properly. Make sure to install the bag correctly.
General| Model | SCBP-1 |
|---|---|
| Category | Vacuum Cleaner |
| Voltage | 120V |
| Filtration | HEPA |
| Dust Capacity | 2.5 quarts |
| Power Source | Electric |
| Amperage | 10 |
| Tank Capacity | 2.5 quarts |
| Filter Type | HEPA |
Explains the polarized alternating current line plug for household models and its safety feature.
Instructions for removing and replacing the headlight bulb on household models.
Guide for removing worn squeegees and installing new ones on commercial models.
