8
Always operate the vacuum cleaner with
a vacuum bag installed.
Bags should be changed when they are
2/3 full.
To Change the Vacuum Bag
1. Unplug the vacuum cleaner. Remove
the bag compartment cover, and
remove the used bag from the bag
holder (Fig. 1).
2. Attach the new vacuum bag onto the
bag holder (Fig. 2).
3. Pull the bottom corners of the new
vacuum bag (Fig. 3).
4. Reinsert the tabs on the end of the
bag compartment cover into the
grooves on the bag compartment
housing. Press it into place, and
fasten the bag compartment cover
latchtightly(Fig. 4).
HOW TO CHANGE THE FILTERS
This vacuum cleaner is equipped with a
secondary filter and a post filter. Filters
should be changed often and cannot be
washed or re-used.
To Change the Secondary Filter
1. Unplug the vacuum cleaner. Lift the latch
to remove the bag compartment cover,
and remove the bag.
2. Remove the secondary filter, and replace
it with a new filter (Fig. 5).
3. Replace the bag and bag compartment cover.
To Change the Post Filter
1. Unplug the vacuum cleaner. Lift the latch
to remove the bag compartment cover.
2. Remove the foam filter from the front of
the bag compartment (Fig. 6).
3. Do not throw away the filter holder.
4. Insert a new filter, and replace the bag
compartment cover.
HOW TO CHANGE THE VACUUM BAG
Fig. 1 Fig. 2
Fig. 3 Fig. 4
Fig. 5
Fig. 6
To Next Page
Loading...
Need help?
General
