Advanced Setup
22
After programming is complete, press the MODE and FAN buttons at the
same time for two seconds to leave the Setup screens. If no buttons are
pressed, the display will leave the setup screens after 30 seconds.
Unoccupied Setpoints
Occupied
O
Unoc-
cupied
Select Dry Contact
Unoccupied operation:
Unoccupied - when the
Dry Contact is closed, the
thermostat will control to the
Unoccupied setpoints
O -when the Dry Contact is closed, the
thermostat will turn o.
Select Dry Contact operation:
Occupied - the thermostat
will enter the Occupied mode
when the Dry Contact is closed.
Unoccupied -the thermostat
will enter the Unoccupied mode when the Dry
Contact is closed.
Step #16 only appears if step #15 = Unoccupied.
Setup
unoccupied
Setup
occupied
MODE
Press
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
