Advanced Setup
23
Df = Factory Default Setting
Step# Description Range Df
1 Time of Day 24 hour 12:00 am
2 Day of the Week Mo - Su Mo
3 Display Blanking On / Off On
4 Single or Dual Setpoint 1 / 2 2
5 2- or 4-Pipe System 2 / 4 4
6 2-Pipe System Operation 1 - 5 1
7 Fan Auto Operation On / Off Off
8 Deadband/Temp. Swing 1st Stage 1˚ - 6˚ 2˚
9 Minimum Heat/Cool Differential 0˚ - 6˚ 2˚
10 Thermoglow Backlight On / Off Off
11 Fahrenheit or Celsius F / C F
12 Read Only Duct Sensor? On / Off Off
13 Override Timer Length 0 - 6 hours 2 hours
14 Dry Contact Polarity NO / NC NO
15 Dry Contact Operation Occupied/Unoccupied Occupied
16 Dry Contact Setpoints Unoccupied / Off Unocupied
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
