15
PHYSICAL DATA (CONT.) -- INDOOR UNITS 40QAC / 40QAQ
Indoor Unit 40QAC 24 36 48 60
System Voltage 208/230 ---1---60 208/230---1---60 208/230---1 ---60 208/230---1---60
Control Voltage 24vac
Operating Weight lb(kg) 108 (49.1) 117 (53.2) 149 (67.7) 179 (81.4)
Refrigerant Type R---410A
Metering Device TXV
Moisture Removal Rate (Pints/hr) 7.1 9.5 13.4 15.1
Indoor Fan
RPM/CFM (High) 1050/ 500* 1275/840 1435/1200 1275/ 1600
RPM/CFM (Medium) 690/400 972/740 1388/1160 972/1220
RPM/CFM (Low) 552/320 830/640 470/670 830/1080
Motor HP 1/15 1/6
Blower Quantity…Size (in) 2…6x8 3…6x8 4…6x8
Indoor Coil
Face Area (sq. ft) 2.2 2.6 3.3 4.5
No. Rows 4 4 4 4
Fins per inch 15 15 15 15
Circuits 4 4 8 8
Filters
Quantity…Size (in) 4…12 x 8.75 5…10.6 x 8.75
4…10.6 x 8.75 2…12 x
8.75
6…12 x 8.75
Refrigerant Lines
Connection Type Flare
Liquid Line (in) OD 3/8
Vapor Line (in) OD 5/8 3/4
Condensate Drain
MTP Outside Diameter (in) ** 3/4
External Finish White With Black Trim End Pieces
* When matched with 38HDR018 RPM/CFM will be 862/500 (high) , 690/400 (medium), and 552/320 (low)
** 5/8” flexible tubing is required when using condensate pump accessory .
Indoor Unit 40QAQ
24 36 48 60
System Voltage 208/230 ---1---60 208/230---1---60 208/230---1---60 208/230---1 ---60
Control Voltage 24vac
Operating Weight lb(kg) 110 (50) 119 (54.1) 151 (68.6) 181 (82.3)
Refrigerant Type R---410A
Metering Device Accurator TXV
Moisture Removal Rate (Pints/hr) 7.1 9.5 13.4 15.1
Indoor Fan
RPM/CFM (High) 1050/ 500* 1275/840 1435/1200 1275/ 1600
RPM/CFM (Medium) 690/400 972/740 1388/1160 972/1220
RPM/CFM (Low) 552/320 830/640 470/670 830/1080
Motor HP 1/15 1/6
Blower Quantity…Size (in) 2…6x8 3…6x8 4…6x8
Indoor Coil
Face Area (sq. ft) 2.2 2.6 3.3 4.5
No. Rows 4 4 4 4
Fins per inch 15 15 15 15
Circuits 4 4 8 8
Filters
Quantity…Size (in) 4…12 x 8.75 5…10.6 x 8.75
4…10.6 x 8.75 2…12 x
8.75
6…12 x 8.75
Refrigerant Lines
Connection Type Flare
Liquid Line (in) OD 3/8
Vapor Line (in) OD 5/8 3/4 7/8***
Condensate Drain
MTP Outside Diameter (in) ** 3/4
External Finish White With Black Trim End Pieces
* When matched with 38HDR018 RPM/CFM will be 862/500 (high), 690/400 (medium), and 552/320 (low)
** 5/8” flexible tubing is required when using condensate pump accessory .
*** Connection size is 3/4”. Recommended line size is 7/8’
40QAC/38HDR -- 40QAQ/38QR