38MARB: Service Manual
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
24
TROUBLESHOOTING
Safety
Electricity power is kept in capacitors even if the power supply is shut off.
NOTE: Remember to discharge the electricity power in capacitor.
Fig. 30 —Electrolytic Capacitors
For other models, connect discharge resistance (approximately 100 40W) or a soldering iron (plug) between the +, - terminals of the electrolytic
capacitor on the contrary side of the outdoor PCB.
Fig. 31 —Discharge Position
NOTE: Fig. 31 is for reference only. The plug on your unit may differ.
(HIGH VOLTAGE! CAUTION!)
To Next Page
Loading...
