11
Wiring diagram
(4) Water valve and damper actuator
Technical specifications
Power supply AC 24V 50/60HZ DC24V
Connecting cable 1m 4*0.75mm²
Rotate angle 90°
Rotate direction Default set as clockwise. Can change to
counterclockwise by the switch under black label
Position indication Mechnical indication
Operating time 90s
IP class IP54
Control signal Y DC 2(0)…10V@input resistance 100Kȍ
Position feedback U DC 2…10V @Max output 1mA
Manual operation Put down manual operation button to unlock
actuator. Then keep pressing then button formanual
operation.
To Next Page
Loading...
