26
5) Remove the PCB from
the fixing pins
3Remove the
fan motor
and fan
wheel
1) Remove the stickers
stick to the volute shell
2) Remove the below volute
shell
3) Disassemble the fan
motor fixing clamps to
remove the fan motor
assembly and fan wheel
assembly
Press the clips to take off the volute shell
The fan motor assembly and
fan wheel assembly can be
removed after took off the
2screws used to fix the fan
motor fixing clamps.
Press
Temperature
sensors T1
T2
To Display board
Swing motor control
Stickers
To Next Page
Loading...
