Carrier 40MKCF - Page 27

27
4) Release the screws
locking the fan wheel on
the shaft, you can
remove the fan wheels.
4 Remove the
display
PCB
1) Release the 2 screws
(both sides) and push the
panel upwards to remove
it
2) Release 11 screws (5 at
the front and 6 at both
sides).
3) Remove the front panel.
The display board is on
the back.
4) Release 2 screws fixing
the display PCB
Take off the scre
w
to remove the fan
wheel
Release the screw
Push it upwards