Carrier 40MKCF - Page 28

28
5) Unplug the wires
5** Remove the
vertical
swing
motor
1) Remove the drain pan
assembly
Release the 2 screws
2) Remove the air outlet
grille assembly by
screwing of 8 screws
release 8 screws
3) Release 2 screws fixing
the swing motor to
remove it
6 Remove 2
horizontal
swing
motors (on
both sides
off the unit)
1) Remove the motor
protective cover
2) Screw off the 2 fixing
screws to remove swing
motor
7 Remove the
evaporator
assembly
1) Remove the 4 screws (2
on left side and 2 on right
side) fixing the
evaporator on both sides
of the unit.
2 screws