Carrier 40TGV0481UP - Page 79

9-1-6. How to set up type of swing
1 Push
for 4 seconds or more during
stop of the operation.
• flashes
2 Push
(At the left side of the button)
and select the unit to be selected.
• Every pushing the button, the unit No. changes.
UNIT No.
1–1
UNIT No.
2–1
UNIT No.
3–1
UNIT No.
No display
UNIT No.
4–1
The fan of the selected unit rotates and the louver
swings.
3 Using
/ buttons, select
type of the swing.
Swing setup code
Swing setup code Louver operation
0001 Standard swing (At shipment)
0002 Dual swing
0003 Cycle swing
REQUIREMENT
• Do not set 0000. (Louver may cause a trouble.)
4 Push .
5 Push to finish the setup.
* Standard swing
Four louvers swing simultaneously with the
same angel.
SwingSwing
* Dual swing
(Recommended for heating operation)
• The adjoined louvers repeat horizontal discharge/
Downward discharge alternately to clear
irregularity of the temperature.
• The vertical discharge spreads hot air to the floor
and the horizontal discharge stirs. Both suppress
the temperature irregularity.
DoDownwwnwardard
dischargedischarge
DoDownwwnwardard
discharge
DoDownwwnward
dischargedischarge
DoDownwwnward
dischargedischarge
HorHorizontalontal
dischargedischarge
HorHorizontalontal
dischargedischarge
HorHorizontalontal
dischargedischarge
HorHorizontalontal
dischargedischarge
Downward
discharge
Downward
discharge
Downward
discharge
Downward
discharge
Horizontal
discharge
Horizontal
discharge
Horizontal
discharge
Horizontal
discharge
* Cycle swing
(Recommended for cooling operation)
• 4 louvers swing with time lag as if they heave.
- 79 -