No. Part name Procedure Remarks
9
Float switch
assembly
1. Detachment
1) Carry out works of item 1 of 7 and
works from 1) to 5).
2) Remove the fixing screw and the
remove the float switch assembly
(Ø4 × 25, 1 pc.)
2. Attachment
1) Mount the float switch assembly a
before with the fixing screw
NOTE :
When mounting, match hole of the float
switch assembly with projection of the drain
pan.
2) Mount the bell mouth as before.
(Ø4 × 10, 8 pcs.)
3) Following to works of item 2 of 7 and
works from 2) to 5), attach the parts as
before.
Float sFloat switch assembwitch assembly
Fixing screFixing screw (w (Ø4 × 25) 25)
Hole of float switch assembly
Projection of drProjection of drain panain pan
Float switch assembly
Fixing screw (Ø4 × 25)
Projection of drain pan
!
Drain pan
1. Detachment
1) Carry out works of item 1 of 4, item
1 of 6, item 1 of 7 and works from
2) to 5).
2) Remove the fixing screws to remove th
drain pan. (Ø4 × 10, 4 pcs.)
2. Attachment
1) Fix parts as before in order of drain cap
→ drain pan → bell mouth.
2) Following to works of item 2 of 7 and
works from 2) to 5), attach parts as
before.
Fixing screws (Ø4 × 10)
Fixing scre
Fixing screws (ws (Ø4 ×10)10)Fixing screws (Ø4 ×10)
To Next Page
Loading...
