Carrier Enterprise
Technical Services
Page 3 of 5
Advanced Information:
1. On the second page of the MENU
options, select ADVANCED INFORMATION.
2. If OPERATIONAL DATA is selected, sensor
and other operational detail can been seen.
• IF more than one IDU is connected
to the same Remote Controller
Pressing TEMP UP or TEMP DOWN
will cycle through the other IDU’s.
3. If ERROR CODE is selected, the last 10
groups of fault codes will be displayed.
4. If DRY CONTACTS is selected, the status
of each can be seen.
Carrier Bryant VRF Remote
Control Quick Startup Guide
To Next Page
Loading...
