Carrier 42SIC - Filter Extraction (Mobile Panel); Cleaning Filter Seats

12
2 - INSTALLATION
Extraction of lter cells in the versions with mobile aspiration panel
- Insert your hands under the end of mobile panel
- Press the plastic lug
- Lift and extract the mobile panel
- Extract the lter
C
B
E
D
B
ap
C
Plastic tabs
D
lter
E
extraction lter
Cleaning ltering seats
- suck up the powder with a vacuum cleaner
- wash the lter with running water without using detergents or solvents, and leave to dry.
- Remount the lter on the cooler-convector (g. 32 ref. A), taking care to insert the lower ap into its seat.
It is forbidden to use the unit without the net lters.
The unit is tted with a safety switch that prevents the operation of the cooler with the mobile panel missing or out of position.
After nishing the cleaning of the lter, check that the panel is mounted correctly.
B
C
C D
B
lter
C
lower edge
D
The lter housing