11
2 - INSTALLATION
2.14 - Maintenance
Routine maintenance is indispensable to keep the 42SI fan coil in perfect working condition, safe and reliable over the years. This can
be done every six months for some interventions and annually for others, by the Technical Service Assistance, technically authorised
and prepared, using always original spare parts.
2.15 - Cleaning the outside
Before every cleaning and maintenance intervention, disconnect the unit from the mains by switching off the master switch.
Wait until the parts have cooled down to avoid the risk of burns.
Do not use abrasive sponges or abrasive or corrosive detergents to avoid damaging the painted surfaces.
When necessary, clean the outer surfaces of the Air Leaf cooler-convector with a soft cloth damp cloth.
2.16 - Cleaning air suction lter
After a period of continuous operation and in consideration of the concentration of impurities in the air, or when he intends to restart
the plant after a period of inactivity, proceed as described.
Extraction of lter cells in the versions with aspiration grill with aps
- extract the front grill by lifting it slightly and turn it until it comes right out of its seat;
- extract the lter, pulling it horizontally outwards.
B
C
D
E
B
front grille
C
See grid
D
lter
E
extraction lter
To Next Page
Loading...
