Use only a circuit-breaker with a suitable
capacity.
Do not obstruct the air discharge of any of the
indoor and outdoor unit. Doing so, blocks the
airflow, reducing the cooling capacity and
causing the unit to malfunction.
The manufacturer accepts no liability in the
event of damage caused by: mistakes or
changes when establishing the electrical
connections or refrigerant gas connections,
during installation or due to the inappropriate
use of the equipment. Failure to observe
these instructions will immediately invalidate
the warranty of your unit.
This unit will only operate correctly if it is
installed and tested by personnel
professionally qualified and trained for such
work.
Keep the unit away from heat sources. High
temperatures may cause physical damage to
the unit.
In summer, prevent sunlight from entering the
air-conditioned area as far as possible. You
can do this by using curtains or blinds on the
windows.
Use the voltage indicated on the unit’s data
plate. Using a voltage different from the
specified voltage may cause very serious
damage to the unit.
5
To Next Page
Loading...
