26
6. Service Menu
The Service menus contain a set of vital information. This information enables the
installer or service person to view a summary of what has been installed, etc. This
information is not covered in the Owner ’s Manual.
To enter service menus, touch menu, then touch and hold the SERVICE icon, for at
least ten seconds, until the icon turns green. The following screens are available in
installation and service. To return to the previous screen, touch BACK.Toexitthe
Service menus, touch DONE.
NOTE: See the Owner’s Manual for information regarding software upgrades.
NOTE: The user “selection of temperatu re units” affects the user screens only. The
service screens use degree F only. The user “selection of temperature units” is
under the display icon on the main menu.
To Next Page
Loading...
