78
6.5.9. Run/Fault History
This information is stored in the equipment circuit boards (if communicating) and
displayed on the control. The indoor unit and outdoor unit (if communicating) have
the following histories. To retu rn to the previous screen, touch BACK.Toexitthe
Service menus, touch DONE.
S Resettable Fa ults: Fault counters for each piece of equipment that can be reset.
S Cycle Counters: Number of heat/cool/power cycles the unit has performed.
S Run Times: Lifetime hours of operation in heating, cooling, and how long the
unit has been powered.
A12202
To Next Page
Loading...
