Carrier A180218C - Thermostat; 1.Auto Mode Set up

31
6.3.1. Thermostat
First touch SETUP, then touch THERMOSTAT to set up the parameters for th e
Infinity System Control.
A180039
6.3.1.1. Auto Mode set up
Once the auto changeover option has been selected, touch SAVE.
S Enable or Disable: Choose to enable or disable auto changeover mode
d Default = Enab le
d Default = Enab le
S Simultaneous Heat/Cool: Choose to turn simultaneous heat cool demand
feature on or off.
d Default = Off
S If Simultaneous Heat/Cool is turned ON, Auto changeover time is grayed out
and shows N/A.