Carrier AQUASNAP 30RBP Series - Page 14

14
Key:

1
Clearancesrequiredformaintenanceandairow
2
Clearance recommended for coil removal
Water inlet
Water outlet
Airoutlet,donotobstruct
Control box
NOTE: Non-contractual drawings.
When designing a system, refer to the certied
dimensional drawings provided with the unit or
available on request.
For the location of fixing points, weight
distribution and coordinates of the centre of
gravity, refer to the certied dimensional drawings.

Partial heat recovery only (OPT)
Desuperheater (OPT)