Carrier AQUASNAP 30RBP - Page 9

30RQP 620R to 1040R
Electrical power
connection
2324 HT
2200
2200
2353 HT
Length (see following unit model table)
500
min
1500
1500
C
C
B
B
B
B
Unit model
30RB/30RBP 170R to 270R 310R to 410R 450R to 550R 610R to 720R - 770R to 950R -
30RQ/30RQP 165R to 270R 310R to 400R 430R to 520R - 620R to 800R - 860R to 1040R
Length (mm) 2410 3604 4797 5992 7708 7185 10096
Key:
All dimensions are given in mm.
NOTE: Non-contractual drawings.
When designing a system, refer to the certied dimensional
drawings provided with the unit or available on request.
Refer to the nameplate for the machine weight.
Refer to the certied dimensional drawings for the location
of xing points, weight distribution and coordinates of the
centre of gravity, hydraulic and electrical connections.
B
Clearances required for maintenance and air ow
C
Clearance recommended for coil removal
Water inlet
Water outlet
Air outlet, do not obstruct
Control box
4 - DIMENSIONS, CLEARANCES, MINIMUM INSTALLATION DISTANCES
9