13
STEP 7. GUIDED SETUP
EQUIPMENT CONFIGURATION
a) The Côr thermostat needs to know how many transformers
are connected to the thermostat.
d If you connected the Rh and Rc and C wires, select two
d Otherwise, select one
b) The Côr thermostat automatically detects the wires you’ve
connected and will ask a few questions to configure your
system based on these connections.
c) If you have a connected accessory such as a whole home
humidifier, dehumidifier or ventilation device, you’ll also
configure it here.
Tip: Use the photo you took of your old
thermostat’s wiring for confirmation.
To Next Page
Loading...
