15
A12178
5.2. Searching for Outdoor Uni t
The Infinity Touch Control will then proceed to communicate with the outdoor unit
by displaying “Searching for outdoor unit”. This includes Infinityr small packaged
products (SPP), with UI Version 8.0 software or later .
NOTE: If the outdoor unit cannot be found, the control will display “Outdoor unit
not found”.
S Select the appropriate unit installed; then, touch NEXT.
d AC1Stage – 1--stage air conditioner
d *AC2Stage – 2--stage air conditioner
d *HP1Stage – 1--stage heat pump
d *HP2Stage – 2--stage heat pump
d None – No outdoor unit installed
NOTE: For small packaged products (SPP), the selection screen is not needed and
will not appear.
S The installer will first be instructed to select the appropriate size of the outdoor
unit; then, touch SELECT.
*Network Interference Module (NIM) may be required for these selections to be displayed.
To Next Page
Loading...
