30
d Normally Op e n
d Normally Closed
6.3.3. Furnace
First touch SETUP, then touch FURNACE to set up the parameters for the furnace
unit.
A12189
6.3.3.1. Furnace Airflow
Selects the airflow of the furnace when heating. EFFICIENCY is the airflow used
to meet specified ratings, COMFORT is a decreased airflow used to increase the
output air temperature and provide increased comfort.
For the Low heat rise option, set to ON if the system contains a bypass humidifier.
The ON setting will increase the furnace low heat airflow.
After the selections are made, touch SAVE.
S Furnace Air Flow: Comfort or Efficiency
d Default = Comfort
S Low Heat Rise: On or Off
d Defau lt = Off
To Next Page
Loading...
