Carrier Infinity SYSTXCCITW01 - Searching SAM Module (if Applicable); Searching for Zones (if Applicable)

18
A13117
5.5. Searching for SAM Module (If Applicable)
“Searching for SAM Module” will appear on the screen to determine if a System
Access Module, used for home automation only, is connected to the system.
NOTE: For more information regarding the SAM Module, reference the latest
version of the application specification entitled “Carrier Communicating HVAC
System” (Version 2 or later), available o n HVACpartners.com, or the System
Access Module Installation Instructions.
5.6. Searching for Zones (If Applicable)
“Zoning -- Searching” will appear on the screen to determine if any zones are
present. The screen will show Zone 1, Zone 2, etc. and indicate all zones having
either a Remote Room Sensor, or smart sensors associated with them. If the system
contains smart sensors, they must be assigned a zone number before continuing.
See the Smart Sensor Installation Instructions on how to assign Smart Sensors to
their respective zones. After each zone has been identified, touch NEXT.