27
d Defau lt = On
6.3.1.6. Smart Recovery Enable
Applies to programmable operation only. Will start recovery 90 minutes prior to
schedule change in both heating and cooling mode. After the selection is made,
touch SAVE.
S Smart Recovery: On or Off
d Defau lt = On
6.3.1.7. Temperature Units Display
This option allows the installer to choose between Fahrenheit and Celsius display.
After the selection is made, touch SAVE.
S Display Option: Selectable between _Fand_C
d Default = _F
6.3.2. Fan Coil
First touch SETUP, then touch FAN COIL to set up the parameters for the fan coil
unit.
A12188
To Next Page
Loading...
