Carrier KSACN0901AAA - Swing and Sleep Modes; Louver Swing Functions; Sleep Mode Operation

OM-KSACN0901-02 Specifications subject to change without notice. 11
Use the Swing (UP-DOWN) Function
(for some models only)
1. Press SWING (Fig. 18) for 2 seconds to start
the UP-DOWN LOUVER SWING function.
When the function is activated, the UP -
DOWN SWING icon appears (Fig. 19).
NOTE: For the KSACN0601AAA model, press
SWING to start the UP-DOWN LOUVER
SWING function. For the KSACN0701AAA
model, press SWING for 2 seconds to start
the UP-DOWN LOUVER SWING function.
2. Press SWING again to stop.
Use the Swing (LEFT-RIGHT) Function
(for some models only)
1. Press SWING (Fig. 18) for 2 seconds to start
the LEFT-RIGHT SWING louver function.
2. Press SWING again for 2 seconds to stop.
When the LEFT-RIGHT SWING function is activated,
the LEFT-RIGHT SWING icon appears (Fig. 20).
Fig. 20 — Left-Right Swing
Sleep
In the AUTOMATIC, COOLING or HEATING
mode, press FUNC. to select the SLEEP icon,
and then press CONFIRM to turn the SLEEP
function on or off, and set the wind speed to
automatic wind.
After the sleep function is turned on, turning on
turbo, 8-degree heating, switching modes, or
adjusting the wind speed will cancel the SLEEP
function.
Fig. 18 — Swing
Fig. 19 — Up-Down Swing