62-12119 8
10. Heaters and Heater Brackets. Refer to Figure 8.
a. Check for damage.
b. Ensure that the heaters are properly positioned in the retain-
ing clips.
c. Inspect wiring for correct connections, and repair if required.
Refer to the TechLINE June 2014 issue for heater
Megaohm testing.
Figure 8 Heaters
11. Heater Termination Thermostat (HTT). Refer to Figure 9.
a. Check for proper positioning and damage.
b. Replace as necessary.
Figure 9 Heater Termination Thermostat (HTT)
To Next Page
Loading...
