9 62-12119
12. USDA and Interior Communication Sockets. Refer to
Figure 10.
a. Check that connectors are clean, dry and have the caps fitted.
b. If corroded or cap is missing, repair or replace as needed.
Figure 10 USDA
13. Air Flow.
a. Check channels or "T" bars on the floor and under the lower
air baffle / kick plate for cleanliness.
b. Channels must be free of debris for proper air circulation.
c. Clean floor drains.
d. Ensure that the kick plate is correctly installed and in good
condition for correct air flow.
To Next Page
Loading...
