– 17 –
Installation Manual
6. Header/Follower
Set the remote control as “Header remote control” or “Follower remote control” when the dual remote control
system is used.
Carry out the setting operation while the indoor unit is stopped. (Turn off the air conditioning unit before starting the
setting operation.)
Note for the Header/Follower setting
• Set the RBC-AMS54E-UL remote control as the Header remote control when the dual remote control system is
used.
• The RBC-AMS54E-UL remote control can be used as the Follower remote control when the dual remote control
system is used that consists of two RBC-AMS54E-UL remote controls.
• The following functions are not available when the remote control is set as the Follower remote control:
Schedule timer / Off reminder timer / Night operation / Energy saving operation / Return back / Saving operation
• Some functions are not available when the remote control is set as the Follower remote control.
• In the dual remote control system, the latter operation overrides the former.
• The remote control is set as “Header remote control” as factory default.
• If the Header/Follower remote control settings are not set correctly, the “E01,” “E03,” or “E09” check code is
displayed.
1 Push the [ ∧ ] / [ ∨ ] button to select
“6. Header/Follower” on the “Initial setting”
screen, then push the “ Set”
[
F2] button.
2 Push the [ ∧ ] / [ ∨ ] button to select
the setting.
3 Push the [
MENU] button.
Æ“ Setting” appears on the screen, then the
screen returns to the “Initial setting” screen.
To Next Page
Loading...
