Carrier RBC-AMS54E-UL - Alarm History

– 26 –
EN
Installation Manual
Checking the model name or serial number
The model name or serial number to be displayed on the Outdoor (Indoor) model name or Outdoor (Indoor) unit
serial No. screen is displayed.
3. Alarm history
List of latest 10 alarm data: information of check code, date, time, and unit, is displayed.
Deleting the alarm history
1 Push the [ ∧ ] / [ ∨ ] button to select
“3. Alarm history” on the “Field setting menu”
screen, then push the “ Set”
[
F2] button.
List of latest 10 alarm data is displayed.
* The oldest data are deleted in order to record
the new ones.
ÆThe date and time when the check code
occurred for the first time is displayed for the
repeated alarm.
1 Push the “ Reset” [ F2] button
while the list of Alarm history is displayed.
2 Push the “ Yes” [
F1] button
after the confirmation screen is displayed.
ÆDelete the Alarm history in each remote control
when the dual remote control system is used.
1.Manual model name input
2.Model name selection
Outdoor model name
RAV-SP180AT2-UL
1-1 Outdoor model name
Return
Set
Fix
Appears here.
1.Test mode
2.Register service info.
3.Alarm history
4.Monitor function
5.Setting louver position
Field setting menu(1/2)
Return
Set
Set
Unit Code Date Time
1. 1–2 E04 31/12/2016 12:25
2. – – – –
3. – – – –
4. – – – –
Alarm history
Return
Reset
Return
Reset all alarm data.
NoYes
Alarm history
B3
Reset
Yes